Moulds are designed and sent to Dutch-Shape
- By Remco Zwinderman
- 7 May, 2010
- Comments Off
This week the moulds have been designed and were sent to Dutch-Shape, to be milled out of solid aluminum. The aluminum is sponsored by AmEuro Metals, a company specialized in … Continue reading →
Propulsion system
- By Pjotr Sillekens
- 26 April, 2010
- Comments Off
In the last few weeks more and more parts of the propulsion system came in at our office. At first, the rolling bearings sponsored by Schaeffler Nederland B.V. arrived, so … Continue reading →
The elevator
- By Remco Zwinderman
- 31 March, 2010
- Comments Off
The wings are finished, up to the point the ailerons can be fitted in. Now work can begin on the elevator since the ailerons are created elsewhere. The elevator is … Continue reading →
Finishing the bottom of the windtunnel wings
- By Remco Zwinderman
- 17 March, 2010
- Comments Off
The bottom part of the wings are finished, the upper part is next. If that is done, the wings itself are finished and the ailerons can be fitted in when … Continue reading →
Windtunnel model manufacturing process
- By Pjotr Sillekens
- 22 February, 2010
- Comments Off
Production of the windtunnel model is continuing steadily in the workshop, during the manufacturing process the DEMO team made some nice shots of the milling process. During milling, the millinghead … Continue reading →
Winglets and aileron hinge production
- By Remco Zwinderman
- 19 February, 2010
- Comments Off
The workshop at Aerospace Engineering has started work on the winglets. The winglets are about 12 cm high and very thin, making it a difficult part to manufacture. Also the … Continue reading →
Windtunnel model wing progress
- By Remco Zwinderman
- 2 February, 2010
- Comments Off
The production of the wings for the windtunnel model is well underway, the crude form of the wings can now be seen. Although the team from DEMO have made much … Continue reading →
First propeller mold
- By Pjotr Sillekens
- 1 February, 2010
- Comments Off
The team from DEMO have finished production of the first propeller mold! An aluminum mold consisting of a top and bottom part of the propeller blades of the first propeller … Continue reading →
Manufacturing of the windtunnel model
- By Kristian Schmidt
- 30 January, 2010
- Comments Off
The employees at the workshop started with the production of the windtunnel model this month. The workshop is part of the DEMO company, Dienst Elektronische en Mechanische Ontwikkeling (Service for … Continue reading →
Copyright © 2013